Redirigiendo al acceso original de articulo en 23 segundos...
ARTÍCULO
TITULO

A Study of Compressive Strength Characteristics of Laterite Sand Hollow Blocks

Olugbenga Ata    
Kolapo Olusola    
Oludare Omojola    
Abiodun Olanipekun    

Resumen

This paper presents the results of experimental investigations carried out on partial replacement of sand with laterite as it affects the compressive strength of sandcrete hollow blocks. Two mix proportions (1:6 and 1:8) were used with laterite content varying between 0 and 50% at 10% intervals. Hand and machine compaction methods were used. Curing was done by sprinkling water on the specimens. The results showed that for each mix proportion and compaction method, the compressive strength decreases with increase in laterite content. Machine compacted hollow sandcrete blocks made from mix ratio 1:6 and with up to 10% laterite content is found suitable and hence recommended for building construction having attained a 28-day compressive strength of 2.07N/mm2 as required by the Nigerian Standards.

Palabras claves

 Artículos similares

       
 
Qi Ping, Shiwei Wu, Xiangyang Li, Yijie Xu, Jing Hu and Shijia Sun    
The aim of this study was to examine the effects of sandstone ring specimens with different inner diameters on dynamic compression mechanical characteristics after dry and wet circulation. To carry out our study, we subjected a sandstone ring specimen wi... ver más
Revista: Applied Sciences

 
Jesus Alejandro Serrato-Pedrosa, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, Guillermo Manuel Urriolagoitia-Calderón, Salvador Cruz-López, Alejandro Urriolagoitia-Luna, David Esaú Carbajal-López, Jonathan Rodolfo Guereca-Ibarra and Guadalupe Murillo-Aleman    
Plantar pressure distribution is a thoroughly recognized parameter for evaluating foot structure and biomechanical behavior, as it is utilized to determine musculoskeletal conditions and diagnose foot abnormalities. Experimental testing is currently bein... ver más
Revista: Applied Sciences

 
Albina Scioti and Fabio Fatiguso    
The construction industry involves some of the activities with the highest consumption of raw materials and significant waste production. According to the European Commission, it requires large quantities of resources, representing approximately 50% of a... ver más
Revista: Applied Sciences

 
Subin Kim, Heejin Hwang, Keunyeong Oh and Jiuk Shin    
The seismically deficient column details in existing reinforced concrete buildings affect the overall behavior of the building depending on the failure type of the column. The purpose of this study is to develop and validate a machine-learning-based pred... ver más
Revista: Applied Sciences

 
Murat Gulen and Havvanur Kilic    
In this study, full-scale laboratory tests were conducted on a 315 mm diameter HDPE pipe under shallow buried and localised surface loading conditions to investigate the effects of pipe deflection and arching on stress distribution and the lateral earth ... ver más
Revista: Applied Sciences