Redirigiendo al acceso original de articulo en 21 segundos...
ARTÍCULO
TITULO

EFFECTS OF VARYING CURING AGE AND WATER/CEMENT RATIO ON THE ELASTIC PROPERTIES OF LATERIZED CONCRETE

Ata Olugbenga    

Resumen

This paper reports the results of investigations carried out on the effect of varying curing age and water/cement ratio on the modulus of elasticity and modulus of deformability of laterized concrete. The test specimens were made with sieved samples of selected grain size ranges of laterite used as fine aggregates to replace sand in normal concrete. Batching was by weight. Three mix ratios of (1:1½:3), (1:2:4) and (1:3:6) were used. Water/cement ratio of 0.5, 0.6, 0.7 and 0.75 were used for each of the mix ratios. The specimens were tested at curing ages of seven to 28 days. The results showed that there was a corresponding increase in both modulus of elasticity and modulus of deformability of laterized concrete due to increase in curing ages. The mix proportion, compressive strength and water/cement ratio were found to have significant effects on both modulus of elasticity and modulus of deformability of laterized concrete.

 Artículos similares

       
 
Yan Zhang, Bingfei Chu, Tianming Huang, Shengwen Qi, Michael Manga, Huai Zhang, Bowen Zheng and Yuxin Zhou    
Carbon geological storage (CGS) is an important global practice implemented to mitigate the effects of CO2 emissions on temperature, climate, sea level, and biodiversity. The monitoring of CGS leakage and the impact of storage on hydrogeological properti... ver más
Revista: Water

 
L. P. Cahalan, M. B. Williams, L. N. Brewer, M. M. McDonnell, M. R. Kelly, A. D. Lalonde, P. G. Allison and J. B. Jordon    
Large-scale metal additive manufacturing (AM) provides a unique solution to rapidly develop prototype components with net-shape or near-net shape geometries. Specifically, additive friction stir deposition (AFSD) is a solid-state method for large-scale m... ver más
Revista: Applied Sciences

 
Stef Depuydt, Lucy Traub, Gilles Van Eygen, Santosh Kumar, Georg Held and Bart Van der Bruggen    
In this work, homogeneous, thin-film proton exchange membranes (PEMs) with superior proton conductivities and high methanol rejection were fabricated via a facile synthesis procedure. Sulfonated polyether ether ketone (sPEEK) was crosslinked via a Friede... ver más
Revista: Applied Sciences

 
Jungho Lee, Ingyu Lee, Seongphil Woo, Yeoungmin Han and Youngbin Yoon    
The spray and combustion characteristics of a gas-centered swirl coaxial (GCSC) injector used in oxidizer-rich staged combustion cycle engines were analyzed. The study focused on varying the recess ratio, presence of gas swirl, and swirl direction to imp... ver más
Revista: Aerospace

 
Sara Bonuso, Pasquale Di Gloria, Guido Marseglia, Ramón A. Otón Martínez, Ghazanfar Mehdi, Zubair Ali Shah, Antonio Ficarella and Maria Grazia De Giorgi    
This study introduces an innovative approach involving the injection of hydrogen into a low-swirl, non-premixed flame, which operates with gaseous fuels derived from an air-blast atomizer designed for aero-engine applications. The aim is to characterize ... ver más
Revista: Aerospace