Redirigiendo al acceso original de articulo en 15 segundos...
ARTÍCULO
TITULO

A Numerical Study on the Impact of Building Dimensions on Airflow Patterns and Bed Morphology around Buildings at the Beach

Paran Pourteimouri    
Geert H. P. Campmans    
Kathelijne M. Wijnberg and Suzanne J. M. H. Hulscher    

Resumen

The attractiveness of beaches to people has led, in many places, to the construction of buildings at the beach?dune interface. Buildings change the local airflow patterns which, in turn, alter the sediment transport pathways and magnitudes. This induces erosion and deposition patterns around the structures. In this study, a numerical model is developed using the open-source computational fluid dynamics solver OpenFOAM. First, the model is used to predict the airflow patterns around a single rectangular building. The model predictions are validated with wind-tunnel data, which show good agreements. Second, a reference beach building is introduced and then the building dimensions are increased in length, width and height, each up to three times the reference building dimension. The impact of each dimensional extent on the near-surface airflow patterns is investigated. The results show that the near-surface airflow patterns are least dependent on the length of the building in the wind direction and they depend most on the width of the building perpendicular to the wind direction. Third, the convergence of the third-order horizontal near-surface velocity field is calculated to interpret the impact of changes in airflow patterns on potential erosion and deposition patterns around the building. The numerical predictions are compared with the observed erosion and sedimentation patterns around scale models in the field. The comparisons show satisfactory agreements between numerical results and field measurements.

 Artículos similares

       
 
Taufiq Saidi,Taufiq Saidi,Muttaqin Hasan,Muttaqin Hasan,Zahra Amalia,Muhammad Iqbal,Muhammad Iqbal     Pág. 155 - 164
The use of synthetic Fiber Reinforced Polymer (FRP) as a composite material is an alternative material that has been widely used for strengthening and repairing reinforced concrete structures. However, the high price is one of the obstacles in applying s... ver más

 
Yufan He, Can Luo, Li Cheng, Yandong Gu and Bin Gu    
The shaft-type tubular pumping station has the remarkable characteristics of a large flow rate and high efficiency. It can realize the functions of irrigation, pumping, and drainage through pumping and generating conditions considering tides. Moreover, i... ver más

 
Jiaqi Hu, Yin Gu, Jinhuang Yan, Ying Sun and Xinyi Huang    
With the convenient and fast requirements for construction in bridge engineering, prefabricated assembly technology is widely applied in engineering construction. Typically, prefabricated bridge decks are connected through cast-in-place wet joints. Wet j... ver más
Revista: Applied Sciences

 
Liang Dai, Chaojun Jia, Lei Chen, Qiang Zhang and Wei Chen    
The intricate geological conditions of reservoir banks render them highly susceptible to destabilization and damage from fluctuations in water levels. The study area, the Cheyipin section of the Huangdeng Hydroelectric Station, is characterized by numero... ver más
Revista: Applied Sciences

 
Omer Faruk Can, Nevin Celik, Filiz Ozgen, Celal Kistak and Ali Taskiran    
In this study, a numerical and experimental analysis of a solar collector with roughness elements in the form of stainless-steel scourers on the absorber surface is presented. According to the location type and number of the stainless steel scourers, the... ver más
Revista: Applied Sciences