Chloride Induced Corrosion and Carbonation in 3D Printed Concrete

Artículos similares

The Role of Cracks in Chloride-Induced Corrosion of Carbon Steel in Concrete?Review

Acceso

Amir Poursaee and Brandon Ross

The majority of works in the field of chloride-indued corrosion of steel in concrete are focused on the cracks formed by the corrosion products. However, the number of studies on the influence of cracks (pre-cracked concrete) on corrosion is limited. Cra... ver más

Revista: Corrosion and Materials Degradation

Properties of Mortar Containing Recycled Fine Aggregate Modified by Microbial Mineralization

Acceso

Mian Luo, Junjie Dai, Ziqi Ding and Ye Liu

Microbial-induced mineralization deposition was used to improve the quality of the recycled fine aggregate (RFA) in this paper. In order to obtain a better improvement effect, the microbial mineralization conditions were first optimized. The effect of th... ver más

Revista: Buildings

Impact of Chloride on the Environmentally-Assisted Crack Initiation Behaviour of Low-Alloy Steel under Boiling Water Reactor Conditions

Acceso

Stefan Ritter and Hans-Peter Seifert

Low-alloy reactor pressure vessel steels have a rather low susceptibility to stress corrosion cracking (SCC) in a boiling water reactor (BWR) environment if the high-temperature water contains no anionic impurities. Recent investigations revealed that un... ver más

Revista: Corrosion and Materials Degradation

Modelling of Chloride Concentration Profiles in Concrete by the Consideration of Concrete Material Factors under Marine Tidal Environment

Acceso

Xueli Ju, Linjian Wu, Mingwei Liu, Han Jiang and Wenxiao Zhang

The corrosion of reinforcement induced by chloride ions is one of the most significant causes of durability deterioration for reinforced concrete (RC) buildings. The concrete material factors, including the water-to-cement ratio (w/c) of concrete, as wel... ver más

Revista: Journal of Marine Science and Engineering

Studies on the Structure, Optical, and Electrical Properties of Doped Manganese (III) Phthalocyanine Chloride Films for Optoelectronic Device Applications

Acceso

María Elena Sánchez Vergara, María José Canseco Juárez, Ricardo Ballinas Indili, Genaro Carmona Reyes, José Ramón Álvarez Bada and Cecilio Álvarez Toledano

In the last few years, significant advances have been achieved in the development of organic semiconductors for use in optoelectronic devices. This work reports the doping and deposition of semiconducting organic thin films based on manganese (III) phtha... ver más

Revista: Coatings

Artículos similares

Revistas destacadas