Resumen
Numerical model updating using the data measured from the actual structure is required in order to minimize the error between the initial numerical model and the actual structure. Field load tests, which are conducted in order to assess the condition and safety of high-speed railway bridges, are generally expensive and restricted by railway control and weather conditions. Therefore, a method for evaluating the performance of high-speed railway bridges using updated numerical models without conducting field load tests is required. In this study, numerical model updating was performed by using the data measured from the ambient vibration test in order to assess the dynamic stability of high-speed railway bridges. In the ambient vibration test, the measurement point roaming method was applied in order to accurately measure high-speed railway bridges using a limited number of sensors. For numerical model updating, the univariate search method was used, and several measured parameters were updated and converted into the properties of the target bridges in the numerical models. The vertical and torsional modes of the updated numerical models differed by less than 5% from those estimated using the data measured from the target bridges. The responses of the updated numerical models were found to be similar to those measured from the high-speed railway bridges in operation. It was also shown that the updated numerical models could be used to assess the dynamic stability of the bridges.