Redirigiendo al acceso original de articulo en 22 segundos...
Inicio  /  Applied Sciences  /  Vol: 14 Par: 5 (2024)  /  Artículo
ARTÍCULO
TITULO

Corrosion Behavior of Zn-Al-Mg-Si Coatings in Sulfur Dioxide-Containing Environment

Henryk Kania and Anzelina Marek    

Resumen

Zn-Al-Mg-Si coatings are an excellent alternative to conventional hot-dip galvanizing coatings. Their high corrosion resistance in corrosive environments containing chlorides and CO2 is well recognized. But sulfur dioxide is also an important stimulator of corrosion in the atmospheric environment. This article presents the results of microstructure (SEM/EDS/XRD) and corrosion behavior tests of Zn-Al-Mg-Si coatings obtained by a double hot-dip method on HSLA steel. The corrosion resistance of the coatings was determined in the sulfur dioxide test with general condensation of moisture (EN ISO 6988). In the corrosion test, Zn-Al-Mg-Si coatings showed twofold smaller weight loss compared to conventional hot-dip zinc coatings. It was found that the corrosion behavior of coatings was influenced by the structural components revealed in the outer layer: Al-rich dendritic and interdendritic areas with Zn/MgZn2 eutectic, MgZn2 intermetallic and Si precipitates and their electrochemical nature. The increase in corrosion resistance was caused by the formation of beneficial corrosion products: layered double hydroxides (LDHs) based on divalent Mg2+ and Zn2+ cations, trivalent Al3+ cations and SO42- anions, and zinc hydroxysulfate?Zn4SO4(OH)6·5H2O. The presence of Si precipitates could cause pitting corrosion of coatings.

 Artículos similares

       
 
Yafeng Zhang, Juncheng Die, Fei Li, Hai Li, Jinchun Tu, Kexi Zhang and Xiaolong Yu    
The search for lightweight and low-cost anticorrosion coatings is particularly important in coastal environments with high salt and humidity. Graphene-based anticorrosion coatings are currently unable to provide long-lasting corrosion protection for meta... ver más
Revista: Coatings

 
Jaehui Bang and Eunkyung Lee    
In this study, the surface properties of marine structures were improved by applying a twin wire arc spray process to high-strength low alloys. The effect of Al and Mo contents in Ni-Al coatings on their mechanical and corrosion behaviors was analyzed us... ver más
Revista: Coatings

 
Byung-Ki Son, Ji-Won Choi, Su-Byung Jeon and In-Joon Son    
Zinc (Zn) coatings, which are widely used to protect metals from corrosion, can be further improved by alloying with nickel (Ni). Increasing the Ni content enhances the corrosion-resistant properties of the Zn coating. This study investigated the effect ... ver más
Revista: Applied Sciences

 
Abdulnaser M. Alshoaibi and Abdullateef H. Bashiri    
The objective of this study is to examine the behavior of fatigue crack growth (FCG) in the mixed mode (I/II) of the AISI 316 austenitic stainless steel alloy, considering mode mixity angles of 30°, 45°, and 60°. This particular alloy is widely used in t... ver más
Revista: Applied Sciences

 
Fengfeng Gao, Fukun Gui, Dejun Feng, Xiaoyu Qu, Fuxiang Hu and Xu Yang