Acceso al sitio web del Consejo de Políticas de Infraestructura

   
Redirigiendo al acceso original de articulo en 20 segundos...
Inicio  /  Applied Sciences  /  Vol: 10 Par: 22 (2020)  /  Artículo
ARTÍCULO
TITULO

Non-Destructive Testing of Aircraft Structures Using Microwire-Based Tensile Stress Sensor

Miroslav ?melko    
Katarína Draganová    
Pavol Lipovský    
Karol Semrád    
Monika Bli?tanová and Patrik Ka?per    

Resumen

The developed microwire-based tensile stress sensor represents an original solution which can be used for the tensile stress measurement of various types of materials, including aircraft structures. The main advantage of the designed sensor is that the measurement can be contactless and the sensitive part of the sensor (microwire) can be embedded directly into the composite material.

PÁGINAS
pp. 0 - 0

 Artículos similares

       
 
Jianguo Zhao, Yang Yu, Hao Xu, Rongtang Zhang, Yuxi Ma and Jialiang Li    
Numerical seismic wave field simulation is essential for studying the dynamic responses in semi-infinite space, and the absorbing boundary setting is critical for simulation accuracy. This study addresses spherical waves incident from the free boundary b... ver más
Revista: Applied Sciences

 
Max Käding and Steffen Marx    
Acoustic emission monitoring (AEM) has emerged as an effective technique for detecting wire breaks resulting from, e.g., stress corrosion cracking, and its application on prestressed concrete bridges is increasing. The success of this monitoring measure ... ver más
Revista: Applied Sciences

 
Pengfei Zhao and Ze Liu    
The three-dimensional (3D) reconstruction of Electromagnetic Tomography (EMT) is an important task for many applications, such as the non-destructive testing of inner defects in rail systems. Additionally, image reconstruction algorithms utilizing deep l... ver más
Revista: Applied Sciences

 
Baitollah Badarloo and Petr Lehner    
The research presented here demonstrates the practical aspects of the numerical correlation of the results of the compressive strength test. The destructive test (DT) in a hydraulic press and the non-destructive test (NDT) using a Schmidt hammer in sever... ver más
Revista: Infrastructures

 
Arno Duijster, Arno Volker, Frenk Van den Berg and Carola Celada-Casero    
The applicability of laser ultrasonics for the determination of grain size and phase composition in steels under different temperatures was investigated. This was done by obtaining the velocity and attenuation of propagating ultrasonic waves in a simulat... ver más
Revista: Applied Sciences