Redirigiendo al acceso original de articulo en 24 segundos...
Inicio  /  Applied Sciences  /  Vol: 12 Par: 7 (2022)  /  Artículo
ARTÍCULO
TITULO

Durability of Glass Fiber Reinforced Cement (GRC) Containing a High Proportion of Pozzolans

Luis Felipe Lalinde    
Ana Mellado    
María Victoria Borrachero    
José Monzó and Jordi Payá    

Resumen

Glass fiber reinforced cement (GRC) is an excellent composite for architects and engineers because it can be molded to produce laminar panels or to create complicated designs. GRC is a fine concrete reinforced with alkali-resistant glass fibers at 3?5% per mass. However, fiber durability is limited because of the aggressiveness of the alkaline medium produced during Portland cement hydration (effect of portlandite). The objective of this study is to assess GRC with high Portland cement replacement with pozzolans (ground fly ash or a mixture of ground fly ash and sonicated silica fume) in order to reduce the corrosion of the fibers. The selected high-content pozzolan (60% replacement) composites were tested under different conditions: aging, drying?wetting, freezing?thawing, and chemical attack (ammonium chloride and sulfuric acid). The modulus of rupture and toughness were determined. Composite behavior showed that the samples with pozzolans not only better resisted aging, but also physical and chemical attacks, and specimens presented a better modulus of rupture and toughness than the samples prepared with 100% Portland cement (control specimens). Due to the good behavior in durability terms, the high pozzolan content GRC products are suitable in potential corrosive environments for sunscreens, drainage channels, cable trays, sound barriers, or pavements.

 Artículos similares

       
 
Jusung Kim, Sumi Jeong, Hojin Kim, Youngjin Kim and Sungyu Park    
Reinforced concrete is the most commonly used material in the construction industry. However, one disadvantage of reinforced concrete is that environmental factors cause materials to penetrate the concrete and cause steel bar corrosion. Rebar corrosion i... ver más
Revista: Applied Sciences

 
Robert Jurczak and Filip Szmatula    
This article presents the results of research on the possibility of replacing fly ash with recycled waste glass in lower-strength concrete mixes. The results of testing concrete mixes containing either waste-glass powder or fly ash are presented in the a... ver más
Revista: Applied Sciences

 
Atizaz Hassan, Rafiullah Khan, Numan Khan, Muhammad Aamir, Danil Yurievich Pimenov and Khaled Giasin    
Composite materials are used in various industries such as marine, aircraft, automotive, etc. In marine applications, composites are exposed to seawater, which can affect their mechanical properties due to moisture absorption. This work focuses on the du... ver más

 
Sung-Jun Lee, Gang-Min Kim and Chang-Lae Kim    
The purpose of this study is to improve the mechanical durability and surface frictional characteristics of polymer/ceramic-based composite materials. Polydimethylsiloxane (PDMS)/glass bubble (GB) composite specimens are prepared at various weight ratios... ver más
Revista: Coatings

 
Simone Berneschi, Giancarlo C. Righini and Stefano Pelli    
Glasses, in their different forms and compositions, have special properties that are not found in other materials. The combination of transparency and hardness at room temperature, combined with a suitable mechanical strength and excellent chemical durab... ver más
Revista: Applied Sciences