Redirigiendo al acceso original de articulo en 15 segundos...
ARTÍCULO
TITULO

A Numerical Performance Analysis of a Rim-Driven Turbine in Real Flow Conditions

Ke Song and Yuchi Kang    

Resumen

The tidal turbines represent a new frontier for extracting energy from tides source. Despite the technology being mature, new solutions aimed at improving performance, reliability with reduced environmental impact, manufacturing and installation costs are currently under investigation. The Rim-driven turbine (abbreviated as RDT) was recently proposed. A RDT resembles a ducted turbine (abbreviated as DT), as both contain blades and a duct. The present study aims at investigating the detail performance and flow field of a RDT in a real flow based on the China Zhaitang Island?s tidal current data. To show the difference between the RDT and DT, simulations are also performed on the corresponding DT. It is found that the power and thrust for the two configurations exhibit time-periodic behavior that is consistent with the wave frequency. At axial flow, the fluctuation amplitude on the power and thrust increase with the increase of tip speed ratio. The RDT has higher power output when operating at lower tip speed ratio and has a potential reduction in flow resistance and disturbance with respect to the DT. At yawed flow, the fluctuation amplitude on the power and thrust decrease with the increase of yaw angle. The RDT has less capable of compensating the effect of yawed inflow in reducing the power than the DT at larger yaw angle. In addition, the power and thrust generates micro-amplitude fluctuation integrated into the main waveform, which the frequency is consistent with the turbine rotation frequency. The wake characteristics analysis reveals that the yawed flow field is more turbulent, and the two configurations suffer strong unsteady flow separation along the whole span. Strong interactions are observed between the rotor?s main wake and the duct?s upper wake. The yaw angle primarily determines the downstream wake deflection direction and significantly changes the wake shape and vortex structures. Meanwhile, the wake flow is found to recover more quickly at larger yaw angle. Besides, due to the open-center of RDT, a part free-stream flow is allowed to travel through and forms an obvious high velocity zone. The presence of open-center of RDT has avoided the low velocity zone, improved the wake structure and accelerated wakes recover, which seems to give an advantageous effect in operating a RDT.

 Artículos similares

       
 
Roberto Scigliano, Valeria De Simone, Roberta Fusaro, Davide Ferretto and Nicole Viola    
The design of integrated and highly efficient solutions for thermal management is a key capability for different aerospace products, ranging from civil aircraft using hydrogen on board to miniaturized satellites. In particular, this paper discloses a nov... ver más
Revista: Aerospace

 
Touraj Farsadi, Majid Ahmadi, Melin Sahin, Hamed Haddad Khodaparast, Altan Kayran and Michael I. Friswell    
In the field of aerospace engineering, the design and manufacturing of high aspect ratio composite wings has become a focal point of innovation and efficiency. These long, slender wings, constructed with advanced materials such as carbon fiber and employ... ver más
Revista: Aerospace

 
Wei Qu, Qianghui Zhang, Yumei Qin, Jinggang Miao, Zeqing He and Yanchu Yang    
A fan is part of the core equipment of a super-pressure balloon altitude control system, and high-performance fans have a significant impact on the altitude control capability and flight safety of super-pressure balloons. This paper proposes a mixed-flow... ver más
Revista: Aerospace

 
Junyao Zhang, Hao Zhan and Baigang Mi    
The submerged inlet exhibits good stealth characteristics and lower drag, but it has a low total pressure recovery coefficient and high distortion rate, which limits its widespread application. This paper proposes a vortex diverter aimed at enhancing the... ver más
Revista: Aerospace

 
Hanqiao Han, Yun Long and Jinqing Zhong    
When we tested the water jet propulsion pump, we found that there were significant vibrations in the pump, especially at small flow points that deviated from the design conditions. The water jet propulsion pump is a mixed-flow pump with guide vane, which... ver más