Redirigiendo al acceso original de articulo en 20 segundos...
Inicio  /  Applied Sciences  /  Vol: 13 Par: 21 (2023)  /  Artículo
ARTÍCULO
TITULO

Creep Properties and Creep Modelling of Guilin Red Clay

Hailong Wei    
Zhanfei Gu    
Zhikui Liu    
Yipeng Wang and Yansong Shi    

Resumen

In order to explore the creep characteristics of red clay under different pressures, the stress?strain curve and stress?strain?time curve of red clay under different pressures were obtained, and the triaxial shear and creep characteristics of red clay under different pressures were analysed. A triaxial shear test and creep test were carried out on red clay from Guilin as the research object under different pressures. The results show that: ? the cohesion and the angle of internal friction of red clay from Guilin, obtained from a triaxial shear test, are 57.20 kPa and 22.47°, respectively; ? according to the physical meaning of the parameters of the Burgers creep model, a simple and practical parameter inversion method is proposed, which can be used to obtain the parameters of the Burgers model for red clay under different perimeter pressures and differing deviatoric stress; and ? when comparing the calculation results with the test results, the correlation coefficients R2 of the two are above 0.9, with a good fitting effect, so the model can accurately describe the creep characteristics of red clay from Guilin. This study can provide a theoretical basis and technical support for engineering construction in the red clay area of Guilin.

Palabras claves

 Artículos similares

       
 
Bingcheng Huang, Aizhong Lu and Ning Zhang    
A solution is proposed for ground surface settlement induced in fractional-generalised Kelvin semi-infinite space by distributed loads, based on the fractional differential theory. The effects of four main parameters?the differential order, the two shear... ver más
Revista: Applied Sciences

 
Tingting Xie, Wenjuan Ren, Yifang Chen, Jiajia Sheng and Linbing Wang    
Incorporating fibers into asphalt mixtures as additives and stabilizers can significantly enhance the performance of asphalt pavements. This study aimed to analyze the impact of using basalt and bamboo fibers as modifiers on the properties of asphalt mas... ver más
Revista: Applied Sciences

 
Giulia Grottesi, Guilherme B. A. Coelho and Dimitrios Kraniotis    
In the world of cultural heritage, a wide range of artefacts and buildings are made of wood and, therefore, are subjected to moisture-induced stress and strain cycles, owing to environmental fluctuations. Simultaneous action of moisture and mechanical lo... ver más
Revista: Applied Sciences

 
Minghao Mu, Chaochao Liu and Zhengnan Liu    
To improve the rutting resistance and anti-aging performance of bio-asphalt, the composite modifier of rock asphalt and montmorillonite is used to modify the bio-asphalt. The optimum content of each component was determined by orthogonal tests based on t... ver más
Revista: Applied Sciences

 
Sara Valvez, Abílio P. Silva and Paulo N. B. Reis    
It is known that 3D-printed PETG composites reinforced with carbon or Kevlar fibres are materials that can be suitable for specific applications in the aeronautical and/or automotive sector. However, for this purpose, it is necessary to understand their ... ver más
Revista: Aerospace