Redirigiendo al acceso original de articulo en 18 segundos...
Inicio  /  Coatings  /  Vol: 13 Par: 6 (2023)  /  Artículo
ARTÍCULO
TITULO

Mechanical Properties and Creep Behavior of Undoped and Mg-Doped GaN Thin Films Grown by Metal?Organic Chemical Vapor Deposition

Ali Khalfallah and Zohra Benzarti    

Resumen

This paper investigates the mechanical properties and creep behavior of undoped and Mg-doped GaN thin films grown on sapphire substrates using metal?organic chemical vapor deposition (MOCVD) with trimethylgallium (TMG) and bis(cyclopentadienyl)magnesium (Cp2Mg) as the precursors for Ga and Mg, respectively. The Mg-doped GaN layer, with a [Mg]/[TMG] ratio of 0.33, was systematically analyzed to compare its mechanical properties and creep behavior to those of the undoped GaN thin film, marking the first investigation into the creep behavior of both GaN and Mg-doped GaN thin films. The results show that the incorporated [Mg]/[TMG] ratio was sufficient for the transition from n-type to p-type conductivity with higher hole concentration around 4.6×1017" role="presentation" style="position: relative;">4.6×10174.6×1017 4.6 × 10 17 cm-3. Additionally, it was observed that Mg doping impacted the hardness and Young?s modulus, leading to an approximately 20% increase in these mechanical properties. The creep exponent is also affected due to the introduction of Mg atoms. This, in turn, contributes to an increase in pre-existing dislocation density from 2 × 108 cm-2 for undoped GaN to 5 × 109 cm-2 for the Mg-doped GaN layer. The assessment of the creep behavior of GaN and Mg-doped GaN thin films reveals an inherent creep mechanism governed by dislocation glides and climbs, highlighting the significance of Mg doping concentration in GaN thin films and its potential impact on various technological applications.

 Artículos similares

       
 
Hyung-Gyu Park, Seok-Ho Kang, Yong-Gik Kim, Jin-Ho Son, Yeong-Su Kim, Seung-Min Woo and Yu-Shin Ha    
In this study, the physical properties of garlic just before collection were investigated, and garlic-collecting conditions are presented as basic data of design factors that can be utilized during the development of garlic collectors. The physical prope... ver más
Revista: Applied Sciences

 
Qingmeng Yuan, Liang Kong, Qianyong Liang, Jinqiang Liang, Lin Yang, Yifei Dong, Zhigang Wang and Xuemin Wu    
Clarifying the mechanical characteristics of gas hydrate-bearing sediments (GHBS) from a mechanical perspective is crucial for ensuring the long-term, safe, and efficient extraction of natural gas hydrates. In this study, seabed soft clay from the northe... ver más

 
Emin Mercan    
This study aimed to determine the effects of the ozone treatment of film-forming solutions (FFSs) containing whey protein concentrate (WPC) and gelatine on biopolymer films? physical, mechanical, and thermal properties. Film samples were produced from a ... ver más
Revista: Applied Sciences

 
Munashe Ignatius Chibinyani, Thywill Cephas Dzogbewu, Maina Maringa and Amos Muiruri    
Lattice structures are useful in the aerospace, automotive, infrastructural, and medical fields due to the way they incorporate a lightweight design and good mechanical properties, because of their hollow shapes. This review paper documents work carried ... ver más
Revista: Applied Sciences

 
Sholpan G. Giniyatova, Rafael I. Shakirzyanov, Yuriy A. Garanin, Nurzhan A. Sailaukhanov, Artem L. Kozlovskiy, Natalia O. Volodina, Dmitriy I. Shlimas and Daryn B. Borgekov    
Ceramics based on zirconium dioxide are very important compounds for dental, implant, and structural material applications. Despite the fact that tetragonally stabilized YSZ has been well studied, the search for new compositions of zirconia-based ceramic... ver más
Revista: Applied Sciences