Resumen
Construction errors are unavoidable in actual cable-bar tensile structures. Construction error analysis, evaluation, and especially adjustment theories were still in their infancy. For the improvement of the situation, based on the equilibrium equation, physical equation, and geometric equation for pin-joint structures, the member length deviation was adopted as the variable, and the relationship between the pre-stress deviation and member length deviation was determined. On this basis, an adjustment method was devised for the pre-stress deviations under three different conditions, and an evaluation of the effectiveness for pre-stress deviation adjustment was proposed. Finally, a 5-m diameter cable-bar tensile structure model was designed and constructed for simulation. The research results demonstrated that the adjusted pre-stress deviations of measuring points can be effectively corrected, and the theoretical results generally coincided with the experimental results. The adjustment effects of pre-stress deviation varied with the number of adjustment cables, and the adjustment effectiveness gradually decreased with the reduction of the number of adjustment cables. Different adjustment schemes produced different structural deformations, and it was necessary to prioritize the adjustment scheme that resulted in lower peak values of internal forces and shape changes during the adjustment process. The research results indicated that the correctness and validity of the proposed error analysis and adjustment method of pre-stress deviation, and its practical application in the guidance of construction errors analysis, pre-stress deviation adjustments, and evaluation of adjustment results of actual pretension structures.