Redirigiendo al acceso original de articulo en 15 segundos...
Inicio  /  Buildings  /  Vol: 12 Par: 12 (2022)  /  Artículo
ARTÍCULO
TITULO

Low Carbon Bacterial Self-Healing Concrete

João Miguel Peres Medeiros and Luigi Di Sarno    

Resumen

A greener and more sustainable option is proposed to shift the construction paradigm of high embedded carbon values in concrete and the frequency of repairs when it cracks. Using low-carbon concrete with a bacterial self-healing agent can reduce the embedded carbon value while adding value to the structure. This paper aims to evaluate the interaction of a bacterial self-healing agent on the mechanical properties of low-carbon concrete, specifically 50% Ground Granulated Blast-furnace Slag (GGBS) as an Ordinary Portland Cement (OPC) replacement. A range of tests is conducted to test the evolution of mechanical properties throughout the early stages of curing for 7, 14, and 28 days. Such tests included the evaluation of compression, flexural, tensile splitting strength and dynamic elastic modulus. The results of the experiments demonstrate that early stages of GGBS mixes exhibit lower compressive capacity throughout the 28-day mark but also indicate their potential to increase sharply and surpass the control mix values after 28 days. The self-healing agent interacts slightly with the GGBS mixes, further reducing the mechanical properties in the early curing stages. However, GGBS mixes increase sharply after the 28-day mark, with the added benefit of further reducing carbon emissions by extending design life and durability. In theory, the newly developed concrete can seal cracks up to 0.3 mm (up to 0.8 mm if using the maximum dosage) but seal wider cracks from laboratory results. These changes imply that using GGBS as a replacement for OPC is viable for structures that do not require high compressive values in the early curing stages but after the 28-day mark while reducing the carbon emission values substantially, in this case, 40%, or up to 50% if using a self-healing agent. This low-carbon concrete is thus a sustainable and resilient material, especially for retrofitting existing reinforced concrete infrastructure.

 Artículos similares

       
 
Yuyang Liu, Bo Feng and Yu Yao    
With the intensification of water pollution problems worldwide, constructed wetlands, as a green, efficient, and energy-saving wastewater treatment technology, have gradually attracted the wide attention of scholars at home and abroad. In order to better... ver más
Revista: Water

 
Pinar Mert Cuce, Erdem Cuce and Saffa Riffat    
The construction sector, including in developed countries, plays a notable part in the overall energy consumption worldwide, being responsible for 40% of it. In addition to this, heating, ventilating and air-conditioning (HVAC) systems constitute the lar... ver más
Revista: Buildings

 
Lei Zhang, Cuikun Wang, Caihua Chen and Mingzhe Cui    
Against the backdrop of China?s continuous promotion of green and low-carbon transformation and the development of construction industrialization, high-strength composite structural systems have significant development prospects. However, their research ... ver más
Revista: Buildings

 
Guangzheng Qi, Qiang Zhang and Zhengning Sun    
Supersulfated cement (SSC), a low-carbon, energy-efficient, eco-friendly cementitious material, is mainly made from industrial byproducts. However, SSC?s slow early strength development leads to inadequate initial hardening and reduced durability, which ... ver más
Revista: Buildings

 
Cong Liu, Hui Zeng and Jiming Cao    
Prefabricated construction (PC) is considered to be a low-carbon construction method. Implementing prefabricated construction projects (PCPs) requires multiple industry organizations to participate and collaborate. As different PCPs are initiated and imp... ver más
Revista: Buildings