Redirigiendo al acceso original de articulo en 23 segundos...
Inicio  /  Applied Sciences  /  Vol: 13 Par: 2 (2023)  /  Artículo
ARTÍCULO
TITULO

The Study of Thermal Stability of Mechanically Alloyed Al-5 wt.% TiO2 Composites with Cu and Stearic Acid Additives

Alexey Prosviryakov and Andrey Bazlov    

Resumen

In this work, we studied the effect of thermal exposure on the microstructure and mechanical properties of an Al-5 wt.% TiO2 composite material with additions of 5 wt.% Cu and 2 wt.% stearic acid as a process control agent (PCA), obtained by mechanical alloying. The composite was processed in a ball mill for 10 h. Composite granules were consolidated by hot pressing at 400 °C. SEM, XRD, and DSC analyses were used to study the microstructure, phase composition, and thermal behavior, respectively. Studies showed that the hot pressing of the material with copper addition leads to the precipitation of Al2Cu particles from the supersaturated solid solution and a decrease in the microhardness to 233 HV in comparison with the as-milled state (291 HV). In the material with a PCA additive, on the other hand, the microhardness increases from 162 to 187 HV due to the formation of aluminum carbide nanoparticles. In both cases, no reduction reaction products were found. At the same time, the Al-5TiO2-2PCA material after hot pressing shows a more stable grain structure than the Al-5TiO2-5Cu material. In addition, the compressive strength at 300 °C of the former material is 1.7 times higher than that of the latter one.

 Artículos similares

       
 
Nora M. Albqmi and Sivasankaran Sivanandam    
The principal objective of the study is to examine the impact of thermal radiation and entropy generation on the magnetohydrodynamic hybrid nano-fluid, Al2O3/H2O, flow in a Darcy?Forchheimer porous medium with variable heat flux when subjected to an elec... ver más
Revista: Computation

 
Wonjae Yoon, Vikas Khandu Bhosale and Hosung Yoon    
The development of propulsion systems based on green propellants, as an alternative to hydrazines, has been gaining interest within the space community. The study of Ammonium Dinitramide (ADN)-based liquid monopropellant, which is low-toxic and can deliv... ver más
Revista: Aerospace

 
Aras Dalgiç and Berivan Yilmazer Polat    
Geopolymer concrete (GC), also known as green concrete, contains slag, silica fume, and fly ash as binders. The absence of cement in concrete is critical to protect the world from the environmental impacts of cement production. In addition, exposure to h... ver más
Revista: Applied Sciences

 
Omer Faruk Can, Nevin Celik, Filiz Ozgen, Celal Kistak and Ali Taskiran    
In this study, a numerical and experimental analysis of a solar collector with roughness elements in the form of stainless-steel scourers on the absorber surface is presented. According to the location type and number of the stainless steel scourers, the... ver más
Revista: Applied Sciences

 
Yue Sun, Xiaohong Shi, Shengnan Zhao, Guohua Li, Biao Sun and Jussi Huotari    
It is imperative to elucidate the process of evaporation in lakes, particularly those that are freshwater and are situated in middle and high latitudes. Based on one-year evaporation and high-frequency meteorological?water quality data of Lake Wuliangsuh... ver más
Revista: Water