Resumen
In today?s industries, a diversity of processes give rise to increasing numbers of non-biodegradable compounds that need to be degraded totally or transformed to other less toxic and/or more biodegradable compounds, before their discharge into the environment. One such compound chosen for this study is Orange II, a representative azo-dye that is widely used and easy to monitor in its degradation. The photo-Fenton process was used under heterogeneous and homogeneous conditions to study several different variables. At the end of this research, a comparative study was carried out between the two types of catalysis. It was observed that better results in primary degradation and mineralization were provided by homogeneous catalysis. The photo-Fenton process takes place effectively under heterogeneous and homogeneous catalysis conditions. The process is much faster under homogeneous conditions than under heterogeneous conditions (99.9 and 24% after 90 min, respectively, especially when only 2 ppm of iron in solution is required). Mineralization was observed through total organic carbon, through the variable C/Co as a function of time during photo-Fenton and Orange II degradation, and the data obtained for the final oxidation capacity are in agreement with the experimental percentages of mineralization. A linear fit was observed using the Chan?Chu kinetic model for heterogeneous and homogeneous catalysis. For heterogeneous catalysis, 56% mineralization was reached whereas the model predicts 63%. Regarding homogeneous catalysis, according to the model, 100% mineralization is reached because (1/s) takes a value greater than 1 since the model calculates it on infinite time.