Redirigiendo al acceso original de articulo en 24 segundos...
ARTÍCULO
TITULO

Basin Testing of Wave Energy Converters in Trondheim: Investigation of Mooring Loads and Implications for Wider Research

Vladimir Krivtsov and Brian Linfoot    

Resumen

This paper describes the physical model testing of an array of wave energy devices undertaken in the NTNU (Norwegian University of Science and Technology) Trondheim basin between 8 and 20 October 2008 funded under the EU Hydralabs III initiative, and provides an analysis of the extreme mooring loads. Tests were completed at 1/20 scale on a single oscillating water column device and on close-packed arrays of three and five devices following calibration of instrumentation and the wave and current test environment. One wave energy converter (WEC) was fully instrumented with mooring line load cells, optical motion tracker and accelerometers and tested in regular waves, short- and long-crested irregular waves and current. The wave and current test regimes were measured by six wave probes and a current meter. Arrays of three and five similar WECs, with identical mooring systems, were tested under similar environmental loading with partial monitoring of mooring forces and motions. The majority of loads on the mooring lines appeared to be broadly consistent with both logistic and normal distribution; whilst the right tail appeared to conform to the extreme value distribution. Comparison of the loads at different configurations of WEC arrays suggests that the results are broadly consistent with the hypothesis that the mooring loads should differ. In particular; the results from the tests in short crested seas conditions give an indication that peak loads in a multi WEC array may be considerably higher than in 1-WEC configuration. The test campaign has contributed essential data to the development of Simulink? and Orcaflex? models of devices, which include mooring system interactions, and data have also been obtained for inter-tank comparisons, studies of scale effects and validation of mooring system numerical models. It is hoped that this paper will help to draw the attention of a wider scientific community to the dataset freely available from the Marintek website.

 Artículos similares

       
 
Sarra Bel Haj Salem, Aissam Gaagai, Imed Ben Slimene, Amor Ben Moussa, Kamel Zouari, Krishna Kumar Yadav, Mohamed Hamdy Eid, Mostafa R. Abukhadra, Ahmed M. El-Sherbeeny, Mohamed Gad, Mohamed Farouk, Osama Elsherbiny, Salah Elsayed, Stefano Bellucci and Hekmat Ibrahim    
In the Zeroud basin, a diverse array of methodologies were employed to assess, simulate, and predict the quality of groundwater intended for irrigation. These methodologies included the irrigation water quality indices (IWQIs); intricate statistical anal... ver más
Revista: Water

 
Paul Sestras, Sevastel Mircea, Sorin M. Cîmpeanu, Razvan Teodorescu, Sanda Ro?ca, ?tefan Bila?co, Teodor Rusu, Tudor Salagean, Lucian Octavian Dragomir, Rastko Markovic and Velibor Spalevic    
As the fertile topsoil is constantly washed away and agricultural production is decreased, soil erosion is a serious environmental issue that affects the entire planet. All river basins experience changes in land use that affect sediment dynamics, soil e... ver más
Revista: Applied Sciences

 
Chiara Martinello, Claudio Mercurio, Chiara Cappadonia, Viviana Bellomo, Andrea Conte, Giampiero Mineo, Giulia Di Frisco, Grazia Azzara, Margherita Bufalini, Marco Materazzi and Edoardo Rotigliano    
In statistical landslide susceptibility evaluation, the quality of the model and its prediction image heavily depends on the quality of the landslide inventories used for calibration. However, regional-scale inventories made available by public territori... ver más
Revista: Applied Sciences

 
Sheng Yan, Zhili Zou, Dong Wang and Zaijin You    
The accurate determination of cross-shore longshore current profiles in the surf zone is essentially important in understanding of coastal physical processes and modelling of longshore sediment transport. In this study, a comprehensive laboratory study w... ver más

 
Yukui Tian, Dongbao Yang, Xuhao Gang, Chaoge Yu, Shunying Ji and Qianjin Yue    
The determination of ice loads on polar vessels and offshore structures is important for ice-resistant design, safe operation, and management of structural integrity in ice-infested waters. Physical model testing carried out in an ice tank/basin is usual... ver más