Redirigiendo al acceso original de articulo en 24 segundos...
Inicio  /  Clean Technologies  /  Vol: 2 Par: 4 (2020)  /  Artículo
ARTÍCULO
TITULO

Combustion Characteristics of Waste Cooking Oil?Butanol/Diesel/Gasoline Blends for Cleaner Emission

Abul K. Hossain    

Resumen

Sustainable green biofuels could replace a significant amount of fossil fuels responsible for environmental pollution. In this study, waste cooking oil (WCO) was tested in a diesel engine either neat or blended separately with diesel, butanol and gasoline, with an additive concentration between 10% and 30% by volume. The heating values of the WCO were slightly decreased when blended with butanol, whereas they increased when blended with either gasoline or diesel. The flash point temperatures decreased. All fuel samples were non-corrosive and non-acidic. At full load, the brake specific fuel consumption of the WCO?additive fuels was approximately 1?3% higher than diesel. The thermal efficiency of the neat WCO, neat diesel and WCO?10% diesel were very close to each other, whereas, in the case of 20% butanol blend, the efficiency decreased by about 2% when compared to the neat diesel value. The WCO?butanol fuel gave the lowest NOx emission and a 0.6% lower CO2 emission than diesel. Combustion characteristics results showed stable engine operation for all blends. The combustion duration was maximal with WCO?butanol blends. The study concluded that the WCO with 10?20% butanol or fossil diesel exhibited similar performance and emission characteristics observed for neat fossil diesel.

 Artículos similares

       
 
Mohsin Raza, Hyder Al Abdallah, Ayah Abdullah and Basim Abu-Jdayil    
Some of the major challenges of the twenty-first century include the continued increase in energy consumption and environmental pollution. One approach to overcoming these challenges is to increase the use of waste materials and environmentally friendly ... ver más
Revista: Buildings

 
Pragya Berwal and Shelly Biswas    
Injection pattern of the oxidizer injected into the combustion chamber is a significant factor in evaluating the performance of a hybrid rocket. In the hybrid rocket combustion process, oxidizer flows over the solid fuel grain surface, leading to a turbu... ver más

 
Cassandra Lafond and Pierre Blanchet    
The energy efficiency of buildings is well documented. However, to improve standards of energy efficiency, the embodied energy of materials included in the envelope is also increasing. Natural fibers like wood and hemp are used to make low environmental ... ver más
Revista: Buildings

 
The purpose of this paper is to investigate the effects of using gas to liquid (GTL)-biodiesel blends as an alternative fuel on the physical properties as well as the combustion and emission reduction characteristics in a diesel engine. In order to asses... ver más
Revista: Energies

 
This study aims to construct a reduced thermodynamic cycle model with high accuracy and high model execution speed based on artificial neural network training for real-time numerical analysis. This paper proposes a method of constructing a fast average-v... ver más
Revista: Energies