Resumen
Combustion of biomass-based solid fuels is becoming increasingly popular, especially in small heat sources. A major problem in the combustion of biomass is the increased production of emissions and especially the solid component of PM particles. Currently, the most used solution to this problem is the application of electrostatic chimney separators, which innovations are discussed in our article. Two models of electrostatic precipitators were constructed in this work. The aim of this work was to compare the use of a standard single-pipe chimney electrostatic precipitator with a newer four-pipe variant. Eight measurements were performed on both devices with and without the use of an electrostatic precipitator, on the basis of which the separation efficiency was evaluated for both variants. The results of the measurements showed the initial value of the average PM production in the one-pipe variant decreased from 1012 to 416 mg.m−3" role="presentation" style="position: relative;">mg.m-3mg.m-3
mg
.
m
-
3
when using the separator, while in the use of the four-pipe variant it decreased from the starting value 342 to only 152 mg.m−3" role="presentation" style="position: relative;">mg.m-3mg.m-3
mg
.
m
-
3
. These results show that the improvement of the classic single-pipe separator by increasing the number of tubes significantly reduced the production of PM emissions and increased the separation efficiency from 66 to 85%.