Redirigiendo al acceso original de articulo en 21 segundos...
ARTÍCULO
TITULO

Design and Mass Optimization of Numerical Models for Composite Wind Turbine Blades

Zhiqiang Zhang    
Chunyan Zhang    
Yinhu Qiao    
Yudie Zhou and Shuaishuai Wang    

Resumen

In this paper, a constrained optimization by linear approximation (COBYLA) algorithm is used to optimize the design of a 5 MW wind turbine blade. In the process of blade material modeling, the actual manufacturing conditions are considered, and the load of blades under 50 m/s wind conditions is analyzed based on the blade element momentum (BEM) method. Mass optimization was achieved by removing material from the shear webs. In addition, constraints such as tip displacement, stress, and frequency during blade design were considered. The results show that the mass is reduced by about 1.7% after removing material from blade webs, while the structural response of the blade remains unchanged. This case provides a practical reference for commercial wind turbine blades.

 Artículos similares

       
 
Fatma Fakhfakh, Sahar Raissi, Karim Kriaa, Chemseddine Maatki, Lioua Kolsi and Bilel Hadrich    
The olive mill wastewater (OMW) treatment process is modeled and optimized through new design of experiments (DOE). The first step of the process is coagulation?flocculation using three coagulants (modeled with the mixture design) followed by photo-degra... ver más
Revista: Water

 
Tamir Shaqarin and Bernd R. Noack    
Limiting the suspension stroke in vehicles holds critical and conceivable benefits. It is crucial for the safety, stability, ride comfort, and overall performance of the vehicle. Furthermore, it improves the reliability of suspension components and maint... ver más
Revista: Applied Sciences

 
Christoforos S. Rekatsinas, Dimitris K. Dimitriou and Nikolaos A. Chrysochoidis    
The present paper investigates the design process and the dimensioning of a tailless type-C composite sandwich unmanned aerial vehicle (UAV). The objective is to investigate an innovative aircraft configuration which exceeds the standard approach of ribs... ver más
Revista: Aerospace

 
Domenik Radeck, Felix He-Mao Hsu, Florian Janke, Gabriele Semino, Tim Hofmann, Sebastian Rink and Agnes Jocher    
The hyperloop concept envisions a low pressure tube and capsules, called pods, traveling at the speed of commercial aircraft as a sustainable, future-proof mass transportation system between cities. However, in contrast to the use case of such a system, ... ver más

 
Jian Qin, Zhenquan Zhang, Xuening Song, Shuting Huang, Yanjun Liu and Gang Xue    
In order to enhance the power generation efficiency and reliability of wave energy converters (WECs), an enclosed inertial WEC with a magnetic nonlinear stiffness mechanism (nonlinear EIWEC) is proposed in this paper. A mathematical model of the nonlinea... ver más