Redirigiendo al acceso original de articulo en 24 segundos...
Inicio  /  Water  /  Vol: 14 Par: 21 (2022)  /  Artículo
ARTÍCULO
TITULO

Effect of Seawater Intrusion on the Formation of Chlorinated and Brominated Trihalomethanes in Coastal Groundwater

Naseeba Parveen and Sudha Goel    

Resumen

Around the world, coastal groundwater is increasingly subject to seawater intrusion (SWI). The quality and characteristics of such waters differ from those of surface and groundwater. In the current study, trihalomethane (THM) formation under varying levels of SWI, natural organic matter (NOM), and chloride-to-bromide (Cl/Br) ratio was evaluated. Different levels of SWI were simulated by mixing deionized water with real seawater (RSW) collected from the Indian Ocean or synthetic seawater (SSW) by varying seawater volumes from 0% to 3%. Humic acid (0 to 5 mg/L) was added to represent NOM at concentrations mimicking natural levels of dissolved organic carbon. The chlorine demand of the simulated water samples was significantly correlated to SWI levels and NOM concentrations. THM concentration in SSW increased from 12.64 µg/L to 105.34 µg/L after 24 h and to 115.8 µg/L after 48 h for an increase from 0% to 3% volume of seawater. For water samples simulated with RSW, maximum THMs after 24 h were 119.2 µg/L, and after 48 h were 126.4 µg/L. An increase in NOM concentration in seawater-intruded water samples resulted in increasing THMs, especially tribromomethane. However, the increment in THMs at higher NOM concentration was lower compared to that at low NOM concentration. Chlorine demand was positively correlated only to tribromomethane. An increase in bromide concentration resulted in lower Cl/Br ratio and a concomitant increase in brominated THMs. The bromine substitution factor corresponding to increasing SWI of 0.25?3% decreased from 2.67 to 1.81 over a reaction time of 24 to 48 h, indicating a shift from TBM dominance to chlorinated THMs.

 Artículos similares

       
 
Shiladitya Paul    
A widely used coating system for corrosion mitigation of offshore steel structures is thermally sprayed aluminium (TSA). Even though these coatings have been used for decades, it is not always clear how they perform in service over long periods, particul... ver más
Revista: Applied Sciences

 
Pengzhang Li, Yun Wang, Yue Liu, Shuying Wang and Yongzhen Peng    
Previous studies have highlighted the salinization caused by the use of seawater to flush toilets and industrial wastewater entering the urban wastewater systems in coastal areas. Thus, in this study, the effect of salinity on N2O emissions during the pa... ver más
Revista: Water

 
Yongjin Sun, Wei Zheng, Zhaowei Li, Zhiquan Zhou and Xiaocong Zhou    
The use of satellite altimetry to recover marine gravity anomalies allows for the rapid acquisition of seafloor topography on a wide range of regional scales. Currently, the commonly used approaches for inverting seafloor topography have been focused on ... ver más

 
Ziyu Wang, Xiangyu Zhao, Xin Chen, Peng Cao, Liang Cao and Wenjing Chen    
To improve the mechanical properties of calcareous sand, it is proposed that microbial induced calcium carbonate precipitation (MICP) technology be used. A series of solidification tests were conducted in natural seawater and freshwater environments. The... ver más

 
Yingna Liang, Cunyuan Wang, Wei Wang, Hao Xing, Zhepeng Zhang and Dianrong Gao    
The slipper pair is the crucial friction pair of the seawater axial piston pump. Taking seawater as the working medium will inevitably affect the bearing performance of the slipper pair. In this paper, a seawater axial piston pump slipper pair model with... ver más